🧪 How to properly measure and regulate the pH of pool water?

Maintaining the proper pH level in pool water is one of the most important elements of pool care . Whether you have a small garden pool, a jacuzzi, or a larger above-ground pool, a stable pH is the foundation of clean and safe water .

In this guide you will learn:

• How to measure pH correctly,

• What are the standards ,

• How to effectively regulate pH using AQUA FUN products.

📊 What is pH and why does it matter?

pH is a value that determines the acidity or alkalinity of water on a scale of 0 to 14:

• pH < 7 – acidic water

• pH = 7 – neutral water

• pH > 7 – alkaline water

The optimal pH for pool water is 7.0–7.4 . This range:

• guarantees the best effect of chlorine and active oxygen ,

• prevents corrosion and scale formation,

• protects skin and eyes from irritation.

🧪 How to measure pH in a pool? Quick and easy methods.

The simplest and most accurate way to control pH is:

✅ AQUA FUN 3-in-1 test strips

• They measure pH, free chlorine and total alkalinity

• Results in just 15 seconds

• Easy to use – just dip the strip in water and compare the colors with the legend on the package

✅ Other methods:

• Drop testers (more precise, but less convenient)

• Electronic pH meters (for large pools and automated systems)

⚠️ What causes abnormal pH?

🔻 Too low pH (< 7.0):

• The water becomes corrosive and destroys the pool components.

• May cause burning eyes and itchy skin

• Limits the effectiveness of disinfectants

🔺 Too high pH (> 7.4):

• The water loses its clarity and sediment may appear.

• Chlorine becomes less active - the risk of bacteria increases

• There are problems with filtration

🧴 How to regulate pH?

AQUA FUN products for pH correction:

🔹 AQUA FUN pH– (pH lowering)

• Use when pH exceeds 7.4

• Powder form – easy application

• Quickly restores the correct pH value

🔹 AQUA FUN pH+ (pH increase)

• Use when pH drops below 7.0

• A safe and efficient product

• It works after just a few hours

✅ Step by step: How to correct pH?

1. Take a test with a 3-in-1 strip

2. Read the result and determine the direction of correction (pH+ or pH–)

3. Measure the appropriate dose (according to the instructions on the package)

4. Dissolve the powder in a bucket of water and pour it into the pool with the pump running.

5. Wait a few hours and then measure again.

🔁 How often should you check your pH?

• At least 2–3 times a week during the bathing season

• Every day during intensive pool use

• After rainfall or water replenishment

📦 Recommended products:

• ✅ AQUA FUN 3-in-1 test strips

• ✅ AQUA FUN pH – (1.5 kg)

• ✅ AQUA FUN pH+ (1 kg)